Surewerx PeakWorks SRL-53303-138, Руководство пользователя

Страница: 6 / 24

WWW.PEAKWORKS.CA
Figure 2
SRL GENERAL OPERATION
The mechanism in this device is activated by centrifugal force acting on the brakes.
This action is produced by the inertia of a fall rapidly spinning the internal drum which in
turn causes the brakes to lock and arrest the fall. Slow reeling of the line will not activate
the brake. If the brake locks – due to a fall – the mechanism will reset if the load is
removed. In a fall arrest situation the mechanism will limit the force acting on the body
to less than 6kN. This device is designed to function vertically or at an angle of no more
than 30º (see Figure 2).
ELECTRICAL HAZARD
Due to the highly conductive nature of the materials used in the construction of this SRL,
use extreme caution when working near unprotected high voltage sources. If in doubt, ask!
SHARP EDGES, ABRASION & CUTTING
The wire rope or the webbing of the SRL should never be allowed to come in contact with
sharp edges or abrasive surfaces. Such contact could prevent the SRL from arresting a fall.
4