396
-
5477Y1 Sentinel Row Control Manual
©2022 SurePoint Ag Systems 39
4/29/2022
SETUP for Row Control & Row Flow Monitoring
-
Rate Setup
-
Flow Adjustment
-
2 Products
33.) For Row Control verify the
Setting is Rx or User Def.
Smoothing usually starts at 10%.
Use Presets to enter up to 3 rates.
34.)
Flow Adjustment
-
Use this to synchronize
the Sentinel flowmeter modules with the main
system flowmeter. Once the accuracy of the main
flowmeter has been confirmed, change the Flow
Adjustment factor as needed to synchronize the
Sentinel reading with the main flowmeter reading.
Main Flowmeter GPM
Sentinel Total Flow GPM =
Flow Adjustment Factor
(If different from 1.00, this should not be much
different. Generally, will be between 0.95 and
1.05.)
V 1.3.0 has
Rate Smooth
for the overall target
rate display. It also has
Row Smooth
to apply
smoothing to the Row Bars showing the flow on
each row. Normal ranges for both are 5% to 15%.
33
33
34
SETUP for 2 products with Row Control and Row Flow Monitoring
Product 2 will usually start with the next row after
Product 1, so if Product 1 has 16 rows, Product 2 will
start with Row 17.
If you are setting up Sentinel to do row control
and row monitoring on 2 products your screen
will look like this. You will need to go through the
setup steps for both Product 1 and Product 2.
SurePoint
Ag
Systems
