STARTING UP YOUR HATCHER:
STEP 1: Plug in your hatcher:
Switch
ON
your hatcher by
plugging it in to the wall plug
.
STEP 2: Connect water bucket to hatcher and fill bucket with water
Your hatcher has an automatic float valve inside that will allow water to flow into the inside
water pan from the bucket on top of the machine. Make sure that you check the bucket
daily and fill with CLEAN WATER as required.
STEP 3: SETTING HATCHER TEMPERATURE: (This will take about 1 hour)
The hatcher has been factory set to heat up to 99.5°F (37.5 Degrees Celsius) when you switch it
on. The hatcher will take about 1 hour to heat up to 99.5°F
***You can change the temperature display from Fahrenheit to Celsius by pressing both
TEMP UP and TEMP DOWN together at the same time and keeping it pressed for 6 seconds.
Next steps:
- Close hatcher door
- Wait for hatcher to reach 99.5°F
- To change the hatcher temperature set-
point simply press the “Temp Up” or “Temp Down” Button
(Generally not required
– only for advanced users
