7
8
Hub without Uplink (MDI) Port
If a hub is not equipped with an uplink (MDI) port, then connection can
be made using either straight cable or crossover cable (see Appendix A,
Technical Specifications for cable requirements).
Using straight cable
When using straight cable, The connection can be made from the uplink
port of the Switch to any port of the Hub.
Using crossover cable
When using crossover cable, the connection can be made from any (Port
#1 - 16) port of the Switch to any port of the Hub.
F DX / C ol
F DX / C ol
1 00 /1 0 M S W IT C H A
F DX / C ol
F DX / C ol
1 00 /1 0 M S W IT C H B
S tra ig h t C a b le
C r o s s o v e r C a b le
Switch to Switch (Other Devices)
The Switch can be connected to another switch or other devices (routers,
bridges, etc.) via a twisted-pair Category 3, 4, 5 UTP/STP straight or
crossover cable.
Using straight cable
When using straight cable, this is done from the Uplink port of the Switch
(Switch A) to any of the 10Mbps or 100Mbps (MDI-X) port of the other
switch (switch B) or other devices.
Using crossover cable
When using crossover cable, this is done from any port of the Switch
(Switch A) to any of the 10Mbps or 100Mbps (MDI-X) port of the other
switch (switch B) or other devices.
Switch A LED indicators for the respective connected ports are as follows:
Link/ACT. is ON.
FDX/COL. depends on the connected switch or other device.
All manuals and user guides at all-guides.com
all-guides.com
