5
6
Following describes how to connect this Switch to your Fast Ethernet
network.
Switch to PC
A PC can be connected to the Switch via a twisted-pair Category 3, 4, 5
UTP /STP straight cable. The PC (equipped with a RJ-45 100/10Mbps
jack) should be connected to any of sixteen ports.
The LED indicators for PC connection are dependant on the LAN card
capabilities. If LED indicators are not illuminated after making a proper
connection, check the PC LAN card, the cable, Switch conditions and
connections.
The following are LED indicator possibilities for a PC to Switch
connection:
1. The Link/ACT. LED indicator illuminates upon hookup.
2. The FDX/COL. LED indicator depends upon LAN card capabilities.
3. The 100M LED indicator comes on for a 100 Mbps and stays off
for 10Mbps.
Network Connections
Switch to Hub
A hub (10BASE-T or 100BASE-TX) can be connected to the Switch via
a twisted-pair Category 3, 4, 5 UTP/STP straight cable. The connection
is accomplished from the any port (MDI-X) to uplink port(MDI) of the
connected hub.
10BASE-T Hub
For a 10BASE-T hub, the Switch LED indicators should illuminate the
following:
Link/ACT. indicator is ON.
FDX/COL. indicator is OFF.
Speed indicator is OFF.
100BASE-TX Hub
For a 100BASE-TX hub, the Switch LED indicators should illuminate the
following:
Link/ACT. is ON.
FDX/COL. LED indicator is OFF.
Speed indicator is ON.
Hub
All manuals and user guides at all-guides.com
