This users guide is applied to the 8 ports 100/10M
N-Way Mini Switch . The 8-Port 100/10M N-Way
Mini Switch is designed for easy installation and
high performance in an environment where traffic
on the network and the number of users increase
continuously. Small businesses and corporate
branch offices can now take full advantage of
100Mbps Fast Ethernet performance and preserve
existing desktop investment with no changes
required to PCs, NICs, cabling, drivers, or PC
configurations.
_
One 8-Port 100/10M N-Way Mini Switch
_
One External Power Adapter
_
Two Screws
_
Two Anchors
_
This Users Guide
Introduction
Package Contents
Hardware
The following describes the front panel, rear panel
and LED indicators of the 8-Port 100/10M N-Way
Mini Switch .
_
Provide one Uplink port for uplink to another
switch, hub or repeater
_
Store-and-forward switching scheme capability to
support rate adaptation and ensures data integrity
_
Auto-negotiation on each port.
_
Auto-polarity detection for correction of incorrect
polarity on the received twisted pair on each port
_
Data forwarding rate 148,800 pps per port at 100%
of wirespeed
_
Data filtering rate eliminates all error packets, runts,
etc. at 148,800 pps per port at 100% of wire-speed
_
The shortest forwarding latency time
_
Conforms to IEEE 802.3 10BASE-T and IEEE 802.
3u 100BASE-TX standards
_
Eight 100/10Mbps RJ-45 ports
_
Support store-and-forward mode switching
_
Full and Half-Duplex mode operation
_
IEEE802.3x flow control for Full-Duplex operation
_
Back pressure for Half-Duplex flow control
_
Support one Uplink port for expansion
_
Auto-negotiation capability
_
Source address learning and aging function
_
LEDs to indicate : TEST, Speed/ACT.,FDX/COL.,
and Power status
Key Features
Front Panel
!
"
#
$
&
%
Speed
Act.
FDX
Col.
Performance Highlights
