3. Basic Connection Procedure
List of Required Equipment
PCs
Network Cables (quantiy dependent how many physical connections are required)
Internet Browser (Netscape Navigator 4.0/Internet Explorer 4.0 or above).
1.
With the Switch turned off, connect each workstations network cable to the RJ45
ports of the EP-716X.
2.
Power on the EP-716X.
3.
Start any Internet Web browser on the network, and key in:
http://xxx.xxx.xxx.xxx where xxx.xxx.xxx.xxx is the IP address of the EP-716X.
Note: Default IP address is 192.168.11.5
This ends the hardware installation portion of the setup procedure. The following
pages will detail the features that will be displayed for editing when you enter the
configuration page of the EP-716X via step 3 above.
Setup Procedure
:
3-1
