The rear panel consists of an AC power socket,Reset Switch.
Rear Panel
1. Power Socket
Plugs the power cord into this socket.
2-32-
CHAPTER 3 Network DIY
2-3
2-4
2. Reset Switch
.
You can configure the Default IP and password of EP-716X(16 Port 100/10 M N-Way
Management Desktop Switch)by pushing the Reset Switch to right side Factory
Default and power on again. When LED indicators off and light up again, the IP
and password have became default value.
.
You can configure it new IP and password by pushing the Reset Switch to left side
Normal operation.
Be careful! When you want to configure new IP and Password, you MUST push the
Reset Switch to left side(Normal).
TCP/IP
ARP, ICMP, IP, TCP, UDP
SNMP
Snmpv1, private MIBS
Web management server
http 1.0 . support Java scripts, Java Applet, CGI, SSI,
Telnet server
telnet 1.0
Spanning tree protocol
IEEE 802.1d
Switch low level Driver
Diver
STP
ARP
IP
ICMP
TCP
UDP
TELNET WEB SNMPv1
Software Specification
.
