SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected]
13
If you Want to Improve Coverage
1. Find a location that receives a stronger signal and relocate the outside antenna to that
location.
2. Increase the distance between the outside and inside antennas.
3. Be sure your signal booster’s dB gain is turned up to maximum gain on each dial.
Installing Your Hardware
Note:
As you can see from the table above, acquiring the recommended indoor and outdoor antenna separation optimizes coverage significantly. Any
reduced antenna separation reduces the booster’s cellular signal capabilities.
WARNING: Do not adjust the uplink and downlink dB attenuation settings more than 20dB.
This could cause the booster to shut down
Step 5. Configure Gain Settings
1. Find the PCS, Cellular, LTE-A, LTE-V and AWS
dials on top of the signal booster.
2. Set the dials according to the coverage areaand
the distance between the indoor and outdoor
antennas (see below).
If Coverage Area is …
And Antenna Separation is…
Set all Dials to…
1500 - 3,000 square feet
40-60 feet
Maximum Power
1,000 - 1,500 square feet
30-40 feet
55 or 60
1,000 square feet and below
20-30 feet
45 or 50
13
https://www.signalbooster.com | 1-855-846-2654 | [email protected]
