SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected]
6
BEFORE INSTALLATION
1. Make sure you have positioned the booster close enough to an existing electrical outlet.
2. Ensure adequate separation between the planned locations of the booster and inside antenna (at least
30 ft.). A separating wall between the booster and inside antenna is ideal. (See page 8).
3. Make sure you have sufficient cable length between the inside antenna location and booster location. The
provided cable is 50 ft.
Installation Overview
Step 1. Find the window that has the strongest signal. Note that the EZ Call and the tabletop antenna should
have a separating wall.
a) If installing in a two story home or office place the EZ Call upstairs and install the inside tabletop
antenna downstairs.
Step 2. Mount the signal booster, connect the cable to the signal booster, and connect the booster to an AC
power source.
a) For optimum performance, place the EZ Call booster in a corner of the window.
Step 3. Install the inside tabletop antenna.
Step 4: Connect power.
EZ CALL INSTALLATION
Step 1. Find the Area With the Strongest Signal
Before installing the booster, find the area in your home with the strongest possible cellular signal.
Note: Window films that block UV rays may also block cellular signals. When using a booster in a home
comprised of film-coated windows, the booster may perform better when placed against a wall facing the
exterior of the home.
The signal booster requires a minimum cellular signal of low –100 dBm to high –90 dBm.
Signal readings usually appear as a negative number (for example, -85). The stronger the EZ Call signal, the
closer it gets to zero. Aim for a signal between -65 and -85 dB. Signals stronger than -50 dB may cause the
booster to shut down. Find the area with the strongest cellular signal source from your service provider by
following the directions below. You can also go to www.antennasearch.com to find the general location of your
carrier’s towers.
Select a window sill location away from buildings, walls, trees, hills, and other terrain features that can block or
reflect wireless signals with the strongest signal.
Measure the strength of the existing cellular signal in various locations.
Before Installation
Содержание EZ Call
Страница 1: ...EZ Call Home Signal Booster Kit User Guide...
