![background image](http://html1.mh-extra.com/html/surebonder/fpc835m/fpc835m_operating-instructions-manual_1406744004.webp)
3
8
APPLICATIONS
Installing 3/32', 1/8", 5/32" & 3/16" blind rivets in various materials in production/commercial
applications.
FEATURES
- Lightweight
- Air hydraulic operating system
- Use with or without mandrel collection
- Carrying Case, jaws and maintenance tools included
AIR SUPPLY
NEVER use oxygen or other bottled gases. Explosion may occur.
This tool is designed to operate on clean, dry, regulated compressed air, between 75 and 100
psi. It is preferable to include an air filter and pressure regulator within 15 feet of the tool, if
possible.
An air filter is needed to remove contaminates and moisture that are contained in compressed
air; filtering will significantly prolong the life of the tool. Do not install a quick coupler directly
into the tool. Higher pressure drastically reduces tool life.
The tool comes factory-equipped with a male quick connector. The tool must always be
connected to the air supply with a coupling that removes all pressure when it is disconnected.
NOTE: all components used with this tool (air hose, connectors, regulators, filters, etc) must
be rated at 120 psi, OR 120% of the maximum compressor potential, whichever is higher. Do
not connect this tool to a system with maximum potential air pressure greater than 120 psi.
! DANGER
Head Cleaning and oiling
Every 10, 000 cycles the jaws of the tool should be cleaned and oiled. Disconnect the air
supply and air valve. To access jaws unscrew nosepiece then unscrew jaw guide. Jaws will
be loose in jaw guide.
Remove housing Remove jaw case
Clean jaws, jaw guide, jaw pusher, spring and thread area of the pulling head. Apply lubricant
to the outside surface of jaws and inside surface of the jaw guide. Reassemble the head by
placing the jaws into the jaw guide. Slide the spring and jaw pusher into the pulling head and
screw the jaw guide onto the pulling head.
20
0
40
60
80 100
120
140
160
Regulator Filter
To compressor
To Tool
Quick Connector Quick Coupler
AIR CONNECTION SET UP
SPECIFICATIONS
Overall Dimensions 11.75" x 10.500”
Stroke .787”
Air Pressure 75-100 PSI
Pull Force 1,872 lbs.
Weight of Tool:
3 lbs.
Sets: 3/32" , 1/8" , 5/32" , 3/16" Rivets
Dimensions
10.500"
MAINTENANCE
(continued)
. 5
1 4
1.7 0"
1
5