Copyright © 2021 Sure Electronics Co., Ltd.
TROUBLE SHOOTING
TROUBLE
HOW TO SOLVE
ICP5 cannot be recognized by PC
➢
Make sure the Type-C cable is of good quality and supports data communication
➢
Make sure ICP5 is not connected to target device when connected to PC
Cannot writing the program into target
product successfully
➢
Make sure the ICP5 be recognized by PC
➢
Make sure the SW1 of ICP5 is at
(USBi) and the SW4 on ICP5 is set at
②
(IIC)
(If the target product is APM2, make sure SW1 on APM2 is set at
(RUN) as well )
➢
Make sure it shows “Active: Downloaded” in the lower right corner in
SigmaStudio
Target device cannot work normally (cannot
play music) under powering condition when
connected with ICP5
➢
Make sure the connection steps are correct and check the input/output cables
➢
Disconnect with ICP5 and re-power target products
➢
Make sure the SW1 on APM2 is set at
(RUN)
(Not applicable to other products)