Be sure to turn and other operations in accordance with the law. Unlike cars, turn indicators
must always be manually cancelled on
Sur-ron
electric motorcycles.
Press the switch and it will return to the off position (middle).
H.ABS Switch
For operations and instructions, see "
Starting and Operating
" page 7.6.
I.
motor switch
When the top ○A of the switch is pressed, it will cut off the power supply for
operation signal.
The controller remains in the state of no power output until the bottom ○B of the switch is
pressed. The switch does not close all operation electrical circuits, only the operating of the
motor.
J.
Front brake handle
When you
pull
the handle backwards, it controls the front braking system. When braking, the
acceleration handle should be in the idle position. The brake lights are also lit.
K.
Riding mode button
For instructions and operations, please refer to page 6.4 of "Feature Introduction".
L. Reverse mode\Switch setting button R\S
For instructions and operations of the function setting, please refer to page 5.1 of "Function
Setting".
Reverse mode: When the throttle is in idle position and the electric motorcycle speed is 0km/h,
press and hold the R/S function key and do not release it. The reverse indicator
R
on the
dashboard will light up, and the electric motorcycle will enter the reverse mode. Twist the
throttle
and the motorcycle starts to reverse; once it enters the reverse mode, releasing the R/S
button will instantly cut off the power.
Only when the R/S button is released and the throttle is
reset to zero will the reverse mode be exited and the forward gear mode will be functionally
again.
M.
Throttle
control
Rotate the
thottle
handle counterclockwise to accelerate the motorcycle.
When the electric motorcycle is in the riding state, the kinetic energy regenerative system
(KERS) will be activated when the ebrake is suddenly activated or the throttle position is bback
to idle. KERS will generate electric energy from the riding motorcycle then stored in the battery
