SUR-RON STORM BEE E 2022, Руководство пользователя, Страница: 13 / 48

A. TURBO Mode Indicator
This indicator shows the working state of
turbo mode. The indicator will dissapear
when turbo mode is not available. The
indicator illuminates when turbo mode is available.
If the indicator is flashing slowly, turbo mode is in
use. If the indicator is flashing fast, turbo mode is
about to end.
B. System Warning Indicator
There are two working states for the
system warning indicator light. An orange
flashing light indicates the power down
state and if a fault has been detected, the indicator
i l l u m i n a t e s a s o l i d o r a n g e l i g h t . S e e
‘Troubleshooting’ for detailed Warning Code, on
page 11.7.
C . Reverse mode indicator （ R ）
The indicator illuminates when the
motorcycle is in reverse mode; the
indicator dissapers when the motorcycle is
out of reverse mode.
D. Turn Signals
Once the Turn Signals is switched on, the
Turn signals remains flashing until the Turn
signals request has been canceled.
E. ASR indicator
The Acceleration Slip Regulation feature is
turned on and off by the ASR switch, and
the ASR indicator turns on and off
accordingly. When the Acceleration Slip Regulation
(ASR) feature of the motorcycle is in the locked on
state, this indicator illuminates. When the ASR
indicator flashes, both the signal of the speed sensor
and the ASR feature is abnormal. Please check
whether the gap between the wheel speed sensor
and the code disk is in the range of 0.8 ~ 1.2mm, and
whether the wheel speed sensor is abnormal
F. High Beam Indicator
When the headlight high beam is on, this
indicator illuminates blue, and remains on
until the high beam is turned off.
G. Low Power Indicator
When the power of the battery pack is low
(SOC < 20%), the low power indicator flashes. If the
power is very low (SOC < 10%), the indicator stays
on.
H. Ready Indicator
It indicates that the motorcycle is ready to
move if the throttle
is twisted.
I. ABS
（Anti-Lock Brake System）Indicator
The indicator illuminates or flashes when
ABS system fails or is in the OFF mode. For
description and operation, see“Starting and
Operating”, on page 7.5.
4.3 4.4
B C A
D
E
F
G
H
I
Display and Indicator
Display and Indicator