SUPRENT HC415SA Скачать руководство пользователя страница 5

Begining The Hair Cut 

Cutting hair requires practice so It is always better to leave the hair 

longer for the first few haircuts until you become used to the length 

to which each comb attachment cuts the hair.

Attachment Comb (see main diagram) 

●Attachment Comb #1 leaves 3mm (1/8 inch) hair length.

●Attachment Comb #2 leaves 6mm (1/4 inch) hair length.

●Attachment Comb #3 leaves 9mm (3/8 inch) hair length.

●Attachment Comb #4 leaves 12mm (1/2 inch) hair length.

Each comb attachment is marked accordingly on its outside middle 

surface.

●To attach a comb, hold it with its teeth upward and slide it onto and 

along the clipper blade until the front of the comb firmly seats against 

the clipper blade.

●To remove the comb, simply pull the comb upward and away from the 

clipper blade.

●For even cutting, allow the comb attachment/cutter through quickly. 

Also remember to comb the hair frequently to remove trimmed hair 

and to check for uneven strands.

 

Before The Hair Cut

1. Inspect the clipper, making sure that it is free of oil between the 

cutting blade teeth and turn the unit on to distribute the oil and to 

make sure it is running smoothly. Wipe off any excess oil. This should 

be done after each use. While using the unit, untwist the cord from 

time to time to avoid tangling.

2. Seat the person so their head is approximately at your eye level. This 

allows ease of visibility while cutting and a relaxed control of the unit.

3. Before cutting always first comb the hair so it is tangle free and as it 

is naturally worn.

Reminders

● Cut the hair in a relaxed and slow manner. Use short strokes only to 

work gradually over the entire head.

● Always take off a little hair at a time; you can always trim off additional 

hair later.

● As you work, comb the hair frequently back into the style to which 

you are cutting.

● When cutting with this Clipper it is better to leave the hair dry, not 

wet. With the hair dry, it is much easier to control the amount of 

hair being cut.4.Place a towel around the neck and shoulders of the 

person having the haircut.

5

6

STEPS FOR HAIR CUTTING

STEPS FOR HAIR CUTTING

 

Содержание HC415SA









Отзывы: