SUPREME BioStaion T2, Руководство пользователя

Страница: 74 / 88

BioStation T2 User Guide
4 Admin Menu
73
■
Door
Select [Menu] > [Device] > [Door].
1
Relay: Select a relay to open the door on authentication. (Values:
Not Used/ Internal Relay 0/ Internal Relay 1/ External Relay 0/
External Relay 1/ SIO0 Relay 0/ SIO0 Relay 1/ SIO1 Relay 0/
SIO1 Relay 1/ SIO2 Relay 0/ SIO2 Relay 1/ SIO3 Relay 0/ SIO3
Relay 1)
2
Driven by: Set the event that triggers door opening and then
press [OK].
-
All Events: The door is open regardless of the
authentication event type.
-
Authentication: The door is open only for the general
authentication events, not for the T&A events.
-
T&A Event: The door is open for the T&A events where the
relay will be used.
-
Authenti T&A Event: The door is open for the T&A
events where the relay will be used among the general
authentication and T&A authentication.
-
Disabled: The door is not open for all events including all
general authentication events and all T&A events.
3
Duration (sec): Sets up the time for which the relay keeps the
door open after an event. The relay will close the door again after
the time has elapsed.
4
RTE(Exit SW): Select the relay for the door switch and then press
[OK]. (Values: Input 0/ Input 1/ Input 2/ Input 3/ SIO0 Input 0/
SIO0 Input 1/ SIO0 Input 2/ SIO0 Input 3/ SIO1 Input 0/ SIO1
Input 1/ SIO1 Input 2/ SIO1 Input 3/ SIO2 Input 0/ SIO2 Input 1/
SIO2 Input 2/ SIO2 Input 3/ SIO3 Input 0/ SIO3 Input 1/ SIO3
Input 2/ SIO3 Input 3)
5
RTE Type: Select the door switch operation type and then press
[OK]. (Values: N/O, N/C)
6
Door Sensor: Select the detection mechanism for door opening
and then press [OK]. (Values: Input 0/ Input 1/ Input 2/ Input 3/
SIO0 Input 0/ SIO0 Input 1/ SIO0 Input 2/ SIO0 Input 3/ SIO1
Input 0/ SIO1 Input 1/ SIO1 Input 2/ SIO1 Input 3/ SIO2 Input 0/
SIO2 Input 1/ SIO2 Input 2/ SIO2 Input 3/ SIO3 Input 0/ SIO3
Input 1/ SIO3 Input 2/ SIO3 Input 3)
7
Door Sensor Type: Select the door sensor operation type and
then press [OK]. (Values: N/O, N/C)
8
Held Open Period(sec): Set the duration of time for the alarm to
go off after the door opens and then press [OK].
9
Unlock Time: Set the time to keep the door forcibly unlocked.
During the unlock time, the door is not closed. (Values: Not Used/
Always/ Auto IN/ Auto Out). The unlock time can be set through
the BioStar only.
10
Lock Time: Set the time to keep the door forcibly locked and then
press [OK]. (Not Used/ Always/ Auto IN/ Auto Out)
Note
Generally, the default values are recommended.