Supreme Heating Heatseeker NovaS, Инструкция по установке и эксплуатации

Страница: 30 / 44

9. NOVA LINK
9.1 DESCRIPTION
An all in one system for autonomous control of heat pumps in line with the filtration system. This
unit permits the heat pump to run outside of filtration hours set by sanitation timers allowing for full
automatic heat demand.
9.2 OPERATION
The NovaLink is designed to switch a 240Vac pump rated to 10 Amps 2400 watts from the switch
inputs. This unit is designed to be connected to a chlorinator and the outputs from heat pumps.
NovaLink is fitted with an LCD screen which displays whether the pump is on and whether the
chlorinator or heat pump is demanding the pump to be operating.
9.3 HEAT DEMAND
A heating device, whatever it is, is designed to heat the pool water only when the water circulates.
Most of the time, a pool is filtered between 4 and 8 hours a day. But such a time sometimes is not
sufficient to maintain the water at the desired temperature, depending on the seasons. This is the
reason why the heat pump is equipped with the “sample” function that will manage the temperature
of the pool. Every hour (times vary depending on the heat pump model) the filtration pump is started
for 5 minutes. If after 5 minutes, the temperature of the water is above the required temperature,
the filtration turns off for one more hour. Otherwise, the filtration and the heat pump are going to
keep operating until the desired temperature is reached.
CHLORINATOR
CELL
CHLORINATOR NOVA LINK
FILTRATION PUMP
FILTER
HEAT PUMP
PUMP
SWITCHING LEAD
PLUG INTO
240 GPO
CAUTION
Heatseeker NovaS & Heatseeker NovaPro series heat pumps use a 240V relay and are
compatable with NovaSwitch & NovaLink accessories only. These are to be installed by a
qualified electrician. Previous generation VortexSwitch & VortexLink controllers are NOT
compatable.
Heatseeker NovaS Heat Pump
Installation & User Manual
28