
WEBtec-4X Suprema Internet Access Control System
Section: Installation Instructions
Power Connection 2
Please read below
carefully
before you install this product. This is
essential
steps for stable
operation. Please make sure to turn on the power of PSE only after connect all cables related
to PoE.
1. Connect 8port Ethernet connect of Xpass body to Ethernet expansion cable in right direction
2. Connect RJ45 modular from Ethernet expansion cable to Ethernet cable with CAT-5
3. Connect the opposite side of Ethernet cable to PoE HUB port
4. Connect cable from PC to port from PoE HUB and connect the opposite side of cable
to Ethernet port of PC
5. Connect power of PoE HUB
Recommended power supply:
Please use the distance of LAN cable within 100m in case of PoE power.
PoE (Power over Ethernet): Use PSE (Power Sourcing Equipment) that complies with IEEE802.3af
standard only.
The Keyless Locks Store
For current prices, please visit our website.
www.KeylessLocksStore.com
46 Danada Sq West #4133
Phone: (630) 909-9504
Wheaton, IL 60189
Page 20 of 35
FAX: (630) 447-3635
Path: Z:\KEY\suppliers\Lockey\website-KEL-zc\_dev\pdfs Modified 05/1
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com