
WEBtec-4X Suprema Internet Access Control System
Section: Installation Instructions
Product Dimensions
Initialization of Network Setting
When you install the Suprema or forget the network setting's value of Suprema in
use, can initial the network setting's value (TCP/IP address, RS-485 setting) in the
switch of Suprema's back side as follows:
1. Press the Reset button in the switch of Xpass' back side for 3
seconds or above.
2. Connect between Xpass and BioStar Client (Verison 1.25 or higher) by
using TCP/IP or RS-485.
Network default setting value:
-TCP/IP Address (Fixed): 192.168.0.1. Not Checked: Use Server
-RS-485: PC Connection. 115200 bps
3. Enter the desired value of TCP/IP address or RS-485 to change setting value.
And then, save setting value.
4. After you delete the Xpass among devices list, re-connect between Xpass and
BioStar using the new TCP/IP address or RS-485 setting.
The Keyless Locks Store
For current prices, please visit our website.
www.KeylessLocksStore.com
46 Danada Sq West #4133
Phone: (630) 909-9504
Wheaton, IL 60189
Page 14 of 35
FAX: (630) 447-3635
Path: Z:\KEY\suppliers\Lockey\website-KEL-zc\_dev\pdfs Modified 05/1
Unit: mm
(not to scale)
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com
©KeylessEntryLocks.com