background image

II

Safety Precautions

In order to use this product safely, be sure to follow the safety precautions
described.

About this manual

Please submit this manual to the operator for reading.

Please read the operation manual carefully before applying the instrument.
On the precondition of full understanding.

This manual only describes the functions of the product. The company does
not guarantee that the product will be suitable for a particular use by the
user.

Precautions for protection, safety and modification of this product

To ensure safe use of this product and the systems it controls, Please read
carefully the operation manual and understand the correct application
methods before putting into operation, to avoid unnecessary losses due to
operation mistakes. If the instrument is operated in other ways not
described in the manual, the protections that the instrument give may be
destroyed, and the failures and accidents incurred due to violation of
precautions shall not be borne by our company.

When installing lightning protection devices for this product and its control
system, or designing and installing separate safety protection circuits for
this product and its control system, it needs to be implemented by other
devices.

If you need to replace parts of the product, please use the model
specifications specified by the company.

This product is not intended for use in systems that are directly related to
personal safety.Such as nuclear power equipment, equipment using
radioactivity, railway systems, aviation equipment, marine equipment,
aviation equipment and medical equipment.If applied, it is the responsibility
of the user to use additional equipment or systems to ensure personal
safety.

Содержание SUP-pH6.0

























Отзывы: