SUPMEA SUP-2100H Series, Руководство пользователя

Страница: 19 / 50

Chapter 2 Starting Measurement
www.supmea.com
10
when the transducers have been adjusted on the pipe by the user, the flow meter
will re-adjust the signal automatically.
Any user-entered configuration value will be retained into the NVRAM of the flow
meter, until it is modified by the user.
2.3 Keypad
The keypad for the operation of the flow meter has l6
＋
2 keys, as shown by the
right dia
Keys
and · are keys to enter numbers
Key is the going UP key, when the user
wants to go to the upper menu window. It also
works as
＋
key when entering numbers
Key is the going DOWN key, when the user
wants to go down-sided menu window. It also
works as the‘-‘ key when entering numbers.
Key
is backspace key, when the user wants
go left or wants backspace the left character that
is located to the left of the cursor.
Key
is the ENTER key for any inputting or selections.
Key is the key for the direct menu window jump over. When ever the user
wants to proceed to a certain menu window, the user can press this key followed
by 2-digit numbers.
The
key is shortened as the‘M' key afterward when referring to the menu
windows.
The
key is for the power on.
The key is for the power off.
2.4 Menu windows
The user interface of this flow meter comprises about l00 different menu windows
that are numbered by M00, M01, M02 . M99.
There are 2 methods to enter certain menu window:
(1) Direct going/entering. The user can press the
key followed by two-digit
number keys. For example, the menu window M11 is for the entering of pipe outer