14
T R O U B L E S H O O T I N G
C H A R T
Motor will not operate or
runs in one direction only
Motor runs extremely hot
Motor runs but drum
doesn’t turn
Winch will not hold load
1. Circuit breaker tripped
2. Switch inoperative
3. Broken wires or bad
connection
4. Damaged motor
1. Long period of operation
2. Damaged motor
3. Damaged brake
1. Clutch not engaged
1. Excessive load
2. Worn or damaged brake
1. Reset Circuit Breaker.
If the winch fails to oper-
ate, the end of the motor
should be checked. If
the circuit breaker has
tripped, this will be
indicated by the center
portion of the breaker
protruding from the
main body. To reset the
breaker, merely press the
center portion back into
the assembly.
2. Replace switch
3. Check for poor
connections:
CAUTION
Always use 2
wrenches (spanners) (see
Figure 12)
4. Replace or repair motor
1. Allow to cool
2. Replace or repair motor
3. Replace or repair brake
1. Engage clutch
1. Reduce load or double
line
2. Repair or replace brake
Symptom
Possible Cause(s)
Corrective Action
If a problem arises, contact your nearest
Superwinch dealer or repair center.
