SYNCING THE REMOTE CONTROL:
Remote Control Instructions:
For the first time use of remote control
or after replacing the battery, you need to sync the remote to the car.
a)
Install the remote-control batteries (AAA not included).
b)
Hold down forward and reverse buttons 2-4 seconds. The
Low speed LED light should be flashing.
c)
Turn on the car by pressing the Power button. The Low
speed LED light should still be flashing and then turn to a
steady light if synced correctly.
d)
If the syncing failed (Low speed LED light still flashing),
remove the batteries and repeat steps a
–
c.
e)
Remote Control indicator light will go off and into power
saving mode if not used for more than 10 seconds.
f)
Button Descriptions:
Forward Backward Turn Right Turn Left
S = Speed - Push button P = Emergency brake, press it once to stop the
for speed selection. motion of the car.
Pressing it again will
There are 3 speed release the emergency brake, restoring the
selections to choose. functions of the car.
1 LED Light on = Low Speed
2 LED Lights on = Medium Speed
3 LED Lights on = High Speed
