ASSEMBLY INSTRUCTIONS:
1: Front Axle & Tire Assembly:
Follow diagram 1 by sliding front steering rack/axle into place &
securing it from the top using a washer & lock nut. Once the
steering rack/axle is in place, install a washer onto left and right
front axles. Then slide the wheel/tire onto the axle with the hub
side of the wheel to the inside of the car. Then, install a washer and
lock nut and tighten the nut with a 17mm socket until end of axle is
flush with the outside of the nut. (Do not overtighten) Finally, snap
the wheel cover into place by lining up the tabs on the wheel covers
to the corresponding slots in the wheel.
