Pull/Tow Function
Prior to using the pull/tow function, it is
necessary to install the rear body
bracket with the tow wheels.
1.
Turn vehicle upside down.
2.
Line up the bracket with
corresponding locations for the
screws near the rear bumber. The
wheels on the bracket need to be
positioned so that they are closest
to the rear bumber and able to flip
out of the bracket to the rear of the
car.
3.
Install 5 screws (supplied) to secure
the bracket to the body of the car.
Using the pull/tow function
1.
Please remove child from car
2.
Locate rear pull/tow wheels under
the rear of car.
3.
Flip the wheels so that they are
locked into position extending out
from the rear of the car.
4.
Locate the handle under the front
of the car.
5.
Flip the handle so that is locked
into position extending out from
the front of the car.
6.
The car is now ready to pull/tow.
Car Operation
Once battery is fully charged, disconnect from charger. Press power button to
start the car. Once the power is on, you will hear the start-up sound of the
engine. To move the car forward,
place “
go-ahead/back
”
switch in the
“
go-
ahead
”
position and press the gas pedal; to move the car backward,
place “
go-
ahead/back
”
switch in the
“back”
position and press the gas pedal.
To operate the car using the remote control first make sure remote has been
paired to the car, the remote should operate the car upon command by
pressing the buttons for the direction you want the car to move. The buttons
found on the steering wheel operate the horn.
