Installing the Rearview Mirror
1.
Align the placement of the mirrors, near
the front of each door.
2.
Push downward on the mirror until it
snaps into place.
Installing the Steering Wheel &
Windshield
1.
Plug the electrical connector on the
steering wheel to the connector located
near the steering rod close to the
dashboard area. (If there is a plastic wire
tie holding wires to steering shaft, you
will need to cut the wire tie prior to
making the connection)
2.
Place steering wheel right side up onto
the metal steering shaft.
3.
Line up hole in metal steering shaft with
hole in the side of the smallest diameter
portion of the steering wheel.
4.
Insert M5 bolt (supplied in the part
package) in one side of above
mentioned hole making sure that it goes
through the hole in the metal steering
shaft and complete through to the other
side of the steering wheel.
5.
Screw on nut (supplied in the parts
package) and tighten until snug.
6.
Align the placement of the windshield, in
front of the steering wheel.
7.
Push downward on the windshield until
it snaps into place.
Installing the Seat
1.
Set the seat in the appropriate position
on the car. Making sure that the tab on
the rear of the seat goes into the slot on
the body of the car.
2.
Secure the seat by pushing the seat
release button and pressing down firmly
on the front of the seat. Release the
button and make sure that the seat is
secure.
