Supertrax Licensed Toyota Tundra Kids Ride on Truck, Инструкция по эксплуатации

Страница: 5 / 20

Reset the Front Axle
1. Gently turn the vehicle body upside down and cut off the plastic
tie on the front axle with scissors.
2. Remove the M5x16 screw, washer and nut from the front wheel
axle.
3. Adjust the wheel axle so that the axle is in the correct position
as shown; making sure the washer sits on the Front Axle Plate,
also the M5x16 screw goes through the holes on the front axle
plate and steering linkage. (ensure the Front Axle Plate sits over
the Steering Linkage as shown with the stopper, to prevent
fingers from becoming trapped while steering), attach the lug
nut and tighten securely. DO NOT over tighten to prevent motor
damage.