Supertrax Licensed Toyota Tundra Kids Ride on Truck, Инструкция по эксплуатации

Страница: 10 / 20

Attach the Rear Wheels
1. Unplug the wire connector from each gearbox in the battery
area (one at a time). Remove gearbox from the battery area
and install on the rear axle on the same side of the car. Make
sure that the motor portion and wires slide into the hole in the
body. Install wheel on the axle. Install washer and locking nut
on the axle and tighten until snug. DO NOT overtighten. Install
wheel center caps. REPEAT STEPS FOR OPPOSITE SIDE
2. Slide the washer onto the rear axle.
Tighten a lug nut to the end of the rear axle with a spanner. DO
NOT overtighten.
3. Repeat the above procedure to assemble the other driving
wheel. HINT: an extra spanner has been provided to hold the
Lug Nut on one side of the rear axle while tightening the Lug
Nut on the opposite side.
4. Insert the center caps to the wheel.