Remote Control Instructions:
For the first time use of remote control
or after replacing the battery, you need to sync the remote to the car.
a)
Install the remote-control batteries (AAA not included).
b)
Hold down forward and reverse buttons 2-4 seconds. The
Low speed LED light should be flashing.
c)
Turn on the car by pressing the Power button. The Low speed
LED light should still be flashing and then turn to a steady light if
synced correctly.
d)
If the syncing failed (Low speed LED light still flashing),
remove the batteries and repeat steps a
–
c.
e)
Remote Control indicator light will go off and into power
saving mode if not used for more than 10 seconds.
f)
Button Descriptions:
Forward
Backward
Turn Right
Turn Left
S
= Speed
–
Push button for speed selection. There are 3 speed
selections to choose from:
1 LED Light on = Low Speed
2 LED Lights on = Medium Speed
3 LED Lights on = High Speed
P =
Emergency brake, press the button
once
to stop the motion of the
car. Pressing it again will release the emergency brake, restoring the
functions of the car.
