9 | P a g e
Connect Power
This set is designed to be operated from two different
power sources as listed below:
AC Power
Plug the AC Cord into the back of the set and insert the AC
plug into standard household outlet.
NOTE:
•
Please be sure the AC Voltage Selector is switched to
your local voltage.
•
This cord is polarized. This means either end of the cord
will only fit ONE way into the socket or wall
•
outlet. If it does not fit, do not force it, just reverse it and
try again.
•
If the AC Cord is plugged into the back of the set, the set
will not work on batteries. To operate the
•
set on batteries, remove the AC plug from the back of
the set.
•
If the AC plug of this unit does not fit in your AC outlet,
a plug adaptor should be used. Consult your
•
local dealer on the type of plug adaptor required.
DC Power
This set runs on 8 size "D" batteries. For best performance,
always use heavy duty alkaline batteries.
TO INSTALL BATTERIES
1.
Remove the Battery Door by gently pushing downward
and outward.
2.
Insert 8 size "D" batteries.
3.
Replace the door.
NOTE:
•
Old batteries may swell and leak. To avoid damage to
your set, remove the batteries when the set is to be
stored for long periods of time or if the batteries
become exhausted (the Power Indicator will not light if
batteries are completely dead).
•
To use your set on battery power you MUST remove the
AC Cord from BOTH the wall outlet AND the back of the
set.
•
Do not mix old and new batteries. Do not mix
rechargeable (nickel cadmium) and regular carbon zinc
or alkaline batteries.
•
The (-) side of battery touches the spring.
