Superrollo GW240 Скачать руководство пользователя страница 18

Страница: 18 / 60

7. Safety instructions

The use of defective equipment can lead to personal

injury and damage to property (electric shocks, short

circuiting).

◆

Never use defective or damaged equipment.

◆

Check the superrollo GW240 / GW245 and the

provided mains cable beforehand for damage.

◆

Should you discover damage to the equipment,

please consult our customer service department

(see page 60).

Incorrect use leads to an increased risk of injury.

◆

Train all personnel to use the superrollo

GW240 / GW245 safely.

◆

This device may be used by children from 8 years

of age upwards as well as by persons with reduced

physical, sensory or mental capacities or with lack

of experience and knowledge if they are supervised

or have been instructed on how to use the device

safely and if they understand what dangers may

resulted from this.

◆

Children must not play with the device. Cleaning and

user maintenance may not be carried out by children

without supervision.

◆

Watch the moving roller shutters whilst carrying out

the settings and during normal operation, and keep

other people away from the area to avoid injury in

the event the shutters suddenly slip.

◆

Carry out all cleaning work on the roller shutters

whilst the device is disconnected from the mains

power.

The mains socket and plug must be easily accessible

at all times.

Exceeding the maximum permissible running time

(KB) may overload and damage the superrollo GW240 /

GW245.

◆

The maximum permissible running time for a cycle

may not be exceeded when the equipment is in oper-

ation. For this reason, the superrollo GW240 / GW245

has an

automatic running time limit (KB)

of four

minutes.

◆

If the running time limit is triggered then the

following error message will appear:

Содержание GW240





























































Результаты поиска

Содержание GW240

Отзывы:

Бренды по названию

Популярные бренды

Superrollo GW240, Инструкция по сборке

Результаты поиска

Содержание GW240

Отзывы:

Бренды по названию

Популярные бренды