Supero X9SPV-M4 Скачать руководство пользователя страница 82

Страница: 82 / 101

Chapter 4: AMI BIOS

4-21



Intel TXT(LT) Configuration

Secure Mode Extensions (SMX)

This feature can be configured if it is supported by the processor. Enable this feature

to activate Intel TXT, below. The options are

Enabled

and Disabled

Intel TXT (LT) Support

Intel TXT (Trusted Execution Technology) helps protect against software-based at-

tacks and ensures protection, confidentiality and integrity of data stored or created

on the system. The options are Enabled and

Disabled.



Intel

Anti-Theft Technology Configuration

Intel

Anti-Theft Technology

Use this feature to enable Intel Anti-theft technology in the BIOS for testing. The
options are Enabled and

Disabled

Intel

Anti-Theft Technology Rec

Use this feature to set the number of times a recovery will be attempted. Enter a
value from 1 to 64. The default setting is



AMT Configuration

This section allows you to configure the Active Management Technology parameters.

Intel AMT

Use this feature to control the BIOS extension execution. If set to enabled, additional

firmware is required in the SPI Device. The options are Disabled and

Enabled

Note

: Intel AMT hardware is always enabled.

Un-Configure ME

Select enabled to un-configure ME without using a password. The options are

Disabled

and Enabled.

WatchDog

Use this feature to enable or disable the WatchDog function. The options are

Dis

abled

and Enabled.



iSCSI Configuration

When sharing the iSCSI devices on this machine (iSCSI target), this section is
used to enter the worldwide unique name of an iSCSI initiator. An iSCSI initiator

Содержание X9SPV-M4






































































































Результаты поиска

Содержание X9SPV-M4

Отзывы:

Похожие инструкции для X9SPV-M4

Бренды по названию

Популярные бренды

Supero X9SPV-M4, Руководство пользователя

Результаты поиска

Содержание X9SPV-M4

Отзывы:

Похожие инструкции для X9SPV-M4

Бренды по названию

Популярные бренды