Supero X9SCE-F, Руководство пользователя

Страница: 58 / 79

4-12
X9SCE-F User’s Manual
SMC Riser Card on Micro-LP
Use this feature to select what riser card to use on the Micro-LP slot. The options
are No Riser and
RSC-MLP-E8R .
Micro-LP PCI-E Slot OPROM
Use this feature to enable or disable the Micro-LP PCI-E slot OPROM option. The
options are
Enabled
and Disabled.

Super IO Device Configuration
Serial Port 1
Select Enabled to enable the onboard serial port. The options are Enabled and
Disabled.
Serial Port 1 Settings
This option specifies the base I/O port address and the Interrupt Request address
of Serial Port 1. Select
Auto
to allow the serial port to automatically assign system
resources. The options for Serial Port 1 are Auto , (IO=3F8h; IRQ=4), (IO=3F8h;
IRQ=3, (IO=2F8h; IRQ=3), (IO=3E8h; IRQ=5), (IO=2E8h; IRQ=7).

Serial Port Console Redirection
COM 1, SOL
These two submenus allow the user to configure the following Console Redirection
settings for a COM Port specified by the user.
COM1, SOL Console Redirection
Select Enabled to use a COM Port selected by the user for Console Redirection.
The options are
Enabled and Disabled. The default setting for COM1 is Disabled ,
and for SOL is Enabled .

Console Redirection Settings
Terminal Type
This feature allows the user to select the target terminal emulation type for Con-
sole Redirection. Select VT100 to use the ASCII Character set. Select VT100+ to
add color and function key support. Select ANSI to use the Extended ASCII Char-
acter Set. Select VT-UTF8 to use UTF8 encoding to map Unicode characters
into one or more bytes. The options are
ANSI, VT100, VT100+ , and VT-UTF8.