Supero X9SCE-F, Руководство пользователя

Страница: 28 / 79

2-8
X9SCE-F User’s Manual
JP18
JP17
JPWR2
I-SATA1 I-SATA3
J4
JKVM1
JPB1
JPG1
JWD1
JPME1
JPME2
JSD1
JBT1
HEARTBEAT LED
UID LED
MICRO-LP PCI-E 3.0 X8
X9SCE-F
PWR
P1-DIMMB2
P1-DIMMB1
P1-DIMMA2
P1-DIMMA1
CPU1
LED4
BIOS
JP16
UID SW
I-SATA2 I-SATA0
SW
8
Rev. 1.0a
Installing and Removing DIMMs
2-4 System Memory
CAUTION
Exercise extreme care when installing or removing DIMM
modules to prevent any possible damage.
How to Install DDR3 DIMMs
1. Insert the desired number of DIMMs into the memory slots, starting with
DIMMA2, then DIMMB2, then DIMMA1, DIMMB1. Pay attention to the notch
along the bottom of the module to prevent incorrect DIMM module installation.
2. Insert each DIMM module vertically and snap it into place. Repeat step 1 to
install more memory, if needed. See instructions on the next page.
Memory Support
This motherboard supports up to 32GB of Unbuffered ECC DDR3 1066/1333/1600*
MHz VLP (Very Low Profile) memory in 4 DIMM slots. (*BIOS rev. 2.0 is needed
for support of new E3-1200 v2 CPUs, which support PCI-E 3.0 and DDR3 1600
MHz memory.)
Note : Check the Supermicro website for a list of memory modules that
have been validated with the X9SCE-F motherboard.
DIMMA1
DIMMB1 Image rotated 90
◦
DIMMA2
DIMMB2