background image

Chapter 2: Installation

2-13

Populating UDIMM (ECC/Non-ECC) Memory Modules

Intel E5-2600 Series Processor UDIMM Memory Support

Ranks Per 

DIMM & 

Data Width

Memory Capacity 

Per DIMM

(See the Note below)

Speed (MT/s) and Voltage Validated by Slot per Channel 

(SPC) and DIMM Per Channel (DPC)

1 Slot Per Channel

2 Slots Per Channel

1DPC

1DPC

2DPC

1.35V

1.5V

1.35V

1.5V

1.35V

1.5V

SRx8 

Non-ECC

1GB

2GB

4GB

NA

1066, 1333, 

1600

NA

1066, 

1333

NA

1066,

1333

DRx8 

Non-ECC

2GB

4GB

8GB

NA

1066, 1333, 

1600

NA

1066, 

1333

NA

1066,

1333

SRx16 

Non-ECC

512MB

1GB

2GB

NA

1066, 1333, 

1600

NA

1066, 

1333

NA

1066,

1333

SRx8 ECC

1GB

2GB

4GB

1066, 

1333

1066, 1333, 

1600

1066, 

1333

1066, 

1333

1066

1066,

1333

DRx8 ECC

2GB

4GB

8GB

1066, 

1333

1066, 1333, 

1600

1066, 

1333

1066, 

1333

1066

1066,

1333

Note:

 For detailed information on memory support and updates, please refer to the SMC Recommended    

Memory List posted on our website at http://www.supermicro.com/support/resources/mem.cfm.

Populating RDIMM (ECC) Memory Modules

Intel E5-2600 Series Processor RDIMM Memory Support

Ranks 

Per 

DIMM 

& Data 

Width

Memory Capacity 

Per DIMM

(See the Note Below)

Speed (MT/s) and Voltage Validated by Slot per Channel (SPC) and 

DIMM Per Channel (DPC)

1 Slot Per Channel

2 Slots Per Channel

1DPC

1DPC

2DPC

1.35V

1.5V

1.35V

1.5V

1.35V

1.5V

SRx8 

1GB

2GB

4GB

1066, 

1333

1066, 1333, 

1600

1066, 

1333

1066, 1333, 

1600

1066, 

1333

1066, 1333, 

1600

DRx8 

2GB

4GB

8GB

1066, 

1333

1066, 1333, 

1600

1066, 

1333

1066, 1333, 

1600

1066, 

1333

1066, 1333, 

1600

SRx4 

2GB

4GB

8GB

1066, 

1333

1066, 1333, 

1600

1066, 

1333

1066, 1333, 

1600

1066, 

1333

1066, 1333, 

1600

DRx4

4GB

8GB

16GB

1066, 

1333

1066, 1333, 

1600

1066, 

1333

1066, 1333, 

1600

1066, 

1333

1066, 1333, 

1600

QRx4

8GB

16GB

32GB

800

1066 

800

1066 

800

800

QRx8

4GB

8GB

16GB

800

1066

800

1066

800

800

Note:

 For detailed information on memory support and updates, please refer to the SMC Recommended    

Memory List posted on our website at http://www.supermicro.com/support/resources/mem.cfm.

Содержание X9DRG-HF+
















































































































Отзывы: