Supero X8ST3-F Скачать руководство пользователя страница 97

Страница: 97 / 105

Appendix B: Installing the Windows OS

B-1

Appendix B

Installing the Windows OS

After all hardware components have been installed, you must first configure Intel South

Bridge RAID Settings before you install the Windows OS and other software drivers. To

configure RAID settings, please refer to RAID Configuration User Guides posted on our

website at www.supermicro.com/support/manuals.

B-1 Installing the Windows OS for Systems with RAID Functions

Insert Microsoft's Windows XP/2003 Setup CD in the CD Driver, and the system will

start booting up from CD.

Press the <F6> key when the message-" Press F6 if you need to install a third party

SCSI or RAID driver" displays.

When the Windows XP/2003 Setup screen appears, press "S" to specify additional

device(s).

Insert the driver diskette- "ITE RAID XP/2003 Driver into Drive A: and press the

<ENTER> key.

When the Windows XP/2003 Setup screen appears, press "S" to specify additional

device(s).

Insert the driver diskette-"Intel AA RAID XP/2003 Driver for ICH10R" into Drive A:

and press the <Enter> key.

Choose the Intel(R) ICH10R SATA RAID Controller from the list indicated in the

XP/2003 Setup Screen, and press the <Enter> key.

Press the <Enter> key to continue the installation process. (If you need to specify any

additional devices to be installed, do it at this time.) Once all devices are specified,

press the <Enter> key to continue with the installation.

From the Windows XP/2003 Setup screen, press the <Enter> key. The XP/2003 Setup

will automatically load all device files and then, continue the Windows XP/2003

installation.

After the Windows XP/2003 OS Installation is completed, the system will automati-

10.

cally reboot.

Содержание X8ST3-F










































































































Результаты поиска

Содержание X8ST3-F

Отзывы:

Supero X8ST3-F, Руководство пользователя, Страница: 97 / 105

Результаты поиска

Содержание X8ST3-F

Отзывы: