Supero X8ST3-F, Руководство пользователя, Страница: 82 / 105

4-14
X8ST3-F/X8STE User’s Manual
the S.M.A.R.T. Select Enabled to allow the AMI BIOS to use the S.M.A.R.T. to
support hard drive disk. The options are Disabled, Enabled, and
Auto .
32-Bit Data Transfer
Select Enable to enable the function of 32-bit IDE data transfer. The options are
Enabled and Disabled.

PCI/PnP Configuration
This feature allows the user to set the PCI/PnP configurations for the following
items:
Clear NVRAM
This feature clears the NVRAM during system boot. The options are No and
Yes.
Plug & Play OS
Selecting Yes allows the OS to configure Plug & Play devices. (This is not required
for system boot if your system has an OS that supports Plug & Play.) Select No to
allow the AMI BIOS to configure all devices in the system.
PCI Latency Timer
This feature sets the latency Timer of each PCI device installed on a PCI bus. Select
64 to set the PCI latency to 64 PCI clock cycles. The options are 32,
64 , 96, 128,
160, 192, 224 and 248.
PCI IDE Bus Master
When enabled, the BIOS uses PCI bus mastering for reading/writing to IDE drives.
The options are Disabled and
Enabled.
PCIE I/O Performance
This feature selects the setting for the IOH PCIE maximum payload size. The op-
tions are
128B and 256B .
ROM Scan Ordering
This item determines what kind of option ROM activates over another. The options
are
Onboard First and Add-on First.
Slot 1 PCI 33MHz, Slot 2 PCI 33MHz, Slot 3 PCIE x8, Slot 4 PCIE x4 on x8,
Slot 5 PCIE x8, Slot 6 PCIE x8 on x16
Use this feature to enable or disable a PCI-E or a PCI slot. The options are Dis-
abled and
Enabled.