Supero X8DTT-H+ Скачать руководство пользователя страница 66

Страница: 66 / 89

4-12

X8DTT-H+/-HF+/-HEF+/-HIBXF+/-HIBQF+

User’s Manual

Confi gure SATA#1 as

This feature allows the user to select the drive type for SATA#1. The options are

IDE,

RAID,

and AHCI. (When the option RAID is selected, the item ICH RAID

Code Base will appear. When the option AHCI is selected, the item SATA AHCI

will be available.)

ICH RAID Code Base (This feature is available when the option-RAID is

selected)

Select Intel to enable Intel's SATA RAID fi rmware to confi gure Intel's SATA RAID

settings. Select Adaptec to enable Adaptec's SATA RAID fi rmware to confi gure

Adaptec's SATA RAID settings. The options are

Intel

and Adaptec.

SATA AHCI (This feature is available when the option-AHCI is selected)

Select Enable to enable the function of Serial ATA Advanced Host Interface.

(Take caution when using this function. This feature is for advanced programmers

only.) The options are Enabled and

Disabled

. If the option-Enabled is selected,

the following item will display.

SATA#2 Confi guration

Selecting Enhanced will set SATA#2 to native SATA mode. The options are Disabled,

and

Enhanced

Primary IDE Master/Slave, Secondary IDE Master/Slave, Third IDE Master,
and Fourth IDE Master

These settings allow the user to set the parameters of Primary IDE Master/Slave,

Secondary IDE Master/Slave, Third and Fourth IDE Master slots. Hit <Enter> to

activate the following submenu screen for detailed options of these items. Set the

correct confi gurations accordingly. The items included in the submenu are:

Type

Select the type of device connected to the system. The options are Not Installed,

Auto

, CD/DVD, and ARMD.

LBA/Large Mode

LBA (Logical Block Addressing) is a method of addressing data on a disk drive

in the LBA mode, the maximum drive capacity is 137 GB. For drive capacities

over 137 GB, your system must be equipped with a 48-bit LBA mode addressing.

If not, contact your manufacturer or install an ATA/133 IDE controller card that

supports 48-bit LBA mode. The options are Disabled and

Auto

Содержание X8DTT-H+


























































































Результаты поиска

Содержание X8DTT-H+

Отзывы:

Похожие инструкции для X8DTT-H+

Бренды по названию

Популярные бренды

Supero X8DTT-H+, Руководство пользователя

Результаты поиска

Содержание X8DTT-H+

Отзывы:

Похожие инструкции для X8DTT-H+

Бренды по названию

Популярные бренды