Supero X8DA3 Скачать руководство пользователя страница 69

Страница: 69 / 97

Chapter 4: AMI BIOS

4-11

Hand-Off support. When enabled, the EHCI Interface will be changed from the BIOS-

controlled to the OS-controlled. The options are Disabled and

Enabled

HDA Controller

Select Enabled to activate the onboard High-Defi nition Audio controller. The options

are

Enabled

and Disabled.

Front_Side Audio Mode

Use this feature to select Front Side Audio Mode. Select HD Audio to enable HD

(High-Defi nition) Audio support. Select AC' 97 to use AC' 97 Audio. The options

are

HD Audio

and AC' 97 Audio.



IDE/SATA Confi guration

When this submenu is selected, the AMI BIOS automatically detects the presence

of the IDE devices and displays the following items:

SATA#1 Confi guration

If Compatible is selected, it sets SATA#1 to legacy compatibility mode, while se-

lecting Enhanced sets SATA#1 to native SATA mode. The options are Disabled,

Compatible and

Enhanced

Confi gure SATA#1 as

This feature allows the user to select the drive type for SATA#1. The options

are

IDE,

RAID

and AHCI.

SATA#2 Confi guration

Selecting Enhanced will set SATA#2 to native SATA mode. The options are Disabled,

and

Enhanced

Primary IDE Master/Slave, Secondary IDE Master/Slave, Third IDE Master,
and Fourth IDE Master

These settings allow the user to set the parameters of the IDE drives specifi ed.

Hit <Enter> to activate the following submenu screen for detailed options of these

items. Set the correct confi gurations accordingly.

Type

This feature allows the user to specify the type of device connected to the system.

Select Auto to allow the BIOS to automatically select the IDE type for the drive

as detected. Select ARMD for removable devices. The options are Not Installed,

Auto

, CD/DVD and ARMD.

Содержание X8DA3


































































































Результаты поиска

Содержание X8DA3

Отзывы:

Похожие инструкции для X8DA3

Бренды по названию

Популярные бренды

Supero X8DA3, Руководство пользователя

Результаты поиска

Содержание X8DA3

Отзывы:

Похожие инструкции для X8DA3

Бренды по названию

Популярные бренды