Supero X7DWN+ Скачать руководство пользователя страница 78

Страница: 78 / 93

4-20

X7DWN+ User's Manual

Hardware Monitor Logic

Highlight this and hit <Enter> to see the status for the following items:

CPU1 Temperature/CPU2 Temperature/System Temperature

Fan1-Fan8 Speeds:

If the feature of Auto Fan Control is enabled, the BIOS will automatically display

the status of the fans indicated in this item.

Fan Speed Control Modes

This feature allows the user to decide how the system controls the speeds of the

onboard fans. The CPU temperature and the fan speed are correlative. When the

CPU on-die temperature increases, the fan speed will also increase, and vice

versa. Select Workstation if your system is used as a Workstation. Select Server

if your system is used as a Server. Select 3-pin if your chassis uses 3-pin fans.

Select 4-pin if your chassis uses 4-pin fans. Select “Disable” to disable the fan

speed control function and allow the onboard fans to constantly run at the full

speed (12V). The Options are:

1. Running at the Full Speed

, 2. Optimized Server

w/3-pin, 3. Optimized Workstation w/3-pin, 4. Optimized Server w/4-pin, and 5.

Optimized Workstation w/4-pin.

Voltage Monitoring

The following items will be monitored and displayed:

VcoreA/VcoreB

+12V/-12V

+5Vsb/+5VDD

+3.3V

P1V5/P_VTT/Vbat

Note:

In the Windows OS environment, the Supero Doctor III settings take pre-

cedence over the BIOS settings. When ﬁ rst installed, Supero Doctor III adopts

the temperature threshold settings previously set in the BIOS. Any subsequent

changes to these thresholds must be made within Supero Doctor, since the SD

III settings override the BIOS settings. For the Windows OS to adopt the BIOS

temperature threshold settings, please change the SDIII settings to be the same

as those set in the BIOS.

Содержание X7DWN+






























































































Результаты поиска

Содержание X7DWN+

Отзывы:

Похожие инструкции для X7DWN+

Бренды по названию

Популярные бренды

Supero X7DWN+, Руководство пользователя

Результаты поиска

Содержание X7DWN+

Отзывы:

Похожие инструкции для X7DWN+

Бренды по названию

Популярные бренды