Supero SuperWorkstation 5036T-T, Руководство пользователя

Страница: 74 / 98

7-10
S
uper
W
orkstation 5036T-T User's Manual
Lockstep - The motherboard uses two areas of memory to run the same set
of operations in parallel.
Sparing - A preset threshold of correctable errors is used to trigger fail-over.
The spare memory is put online and used as active memory in place of the
failed memory.
Demand Scrubbing
A memory error-correction scheme where the Processor writes corrected data
back into the memory block from where it was read by the Processor. The
options are
Disabled and Enabled.
Patrol Scrubbing
A memory error-correction scheme that works in the background looking for
and correcting resident errors. The options are
Disabled and Enabled.
Throttling - Closed Loop
Throttling improves reliability and reduces power in the processor by
automatic voltage control during processor idle states. Available options are
Disabled and Enabled. If Enabled, the following items will appear:
Hyster Temp
Temperature Hysteresis is the temperature lag (in degrees Celsius) after the
set DIMM temperature threshold is reached before Closed Loop Throttling
begins. The options are Disabled , 1.5
o
C, 3.0
o
C, and 6.0
o
C.
Guardband Temp
This is the temperature which applies to the DIMM temperature threshold.
Each step is in 0.5
o
C unit. The default is [006] . Press "+" or "-" on your
keyboard to change this value.
Inlet Temp
This is the temperature detected at the chassis inlet. Each step is in 0.5
o
C
unit. The default is [070] . Press "+" or "-" on your keyboard to change
this value.
Temp Rise
This is the temperature rise to the DIMM thermal zone. Each step is in
0.5
o
C unit. The default is [020] . Press "+" or "-" on your keyboard to
change this value.