Supero SuperServer 6113M-i, Руководство пользователя

Страница: 19 / 102

Chapter 2: Server Installation
2-1
Chapter 2
Server Installation
2-1 Overview
This chapter provides a quick setup checklist to get your SuperServer 6113M-i
up and running. Following these steps in the order given should enable you to
have the system operational within a minimum amount of time. This quick setup
assumes that your SuperServer 6113M-i system has come to you with the pro-
cessors and memory preinstalled. If your system is not already fully integrated
with a serverboard, processors, system memory etc., please turn to the chapter
or section noted in each step for details on installing specific components.
2-2 Unpacking the SuperServer 6113M-i
You should inspect the box the SuperServer 6113M-i was shipped in and note if
it was damaged in any way. If the server itself shows damage you should file a
damage claim with the carrier who delivered it.
Decide on a suitable location for the rack unit that will hold the SuperServer
6113M-i. It should be situated in a clean, dust-free area that is well ventilated.
Avoid areas where heat, electrical noise and electromagnetic fields are gener-
ated. You will also need it placed near a grounded power outlet. Be sure to read
the Rack and Server Precautions in the next section.
2-3 Preparing for Setup
The box the SuperServer 6113M-i was shipped in should include two sets of rail
assemblies, two rail mounting brackets and the mounting screws you will need
to install the system into the rack. Follow the steps in the order given to
complete the installation process in a minimum amount of time. Please read this
section in its entirety before you begin the installation procedure outlined in the
sections that follow.