Supero SUPERSERVER 6037R-TXRF, Руководство пользователя

Страница: 46 / 104

5-18
S
UPER
S
ERVER 6037R-TXRF User's Manual
Chassis Intrusion
A Chassis Intrusion header is located
at JL1 on the serverboard. Attach an
appropriate cable from the chassis to
inform you of a chassis intrusion when
the chassis is opened.
Chassis Intrusion
Pin Definitions
Pin# Definition
1 Intrusion Input
2 Ground
Fan Header
Pin Definitions
Pin# Definition
1 Ground
2 +12V
3 Tachometer
4 PWR Modulation
(Available for 4-pin
fans only)
Fan Headers
This serverboard has ten system/CPU/
PCH fan headers (Fan 1~Fan 8 Fan A,
and Fan B) on the serverboard. Fans
7/8 are CPU fans. All these 4-pin fans
headers are backward compatible
with the traditional 3-pin fans. The
fan speeds are controlled by Thermal
Management via Hardware Monitoring
in the Advanced Setting in the BIOS
for the 4-pin fans (See Chapter 5 for
more details.) In addition to 4-pin fans,
a 3-pin fan (Fan PCH), located next to
the PCH chip, is also available for PCH
cooling. See the table on the right for
pin definitions.
Internal Speaker
The Internal Speaker, located at
SP1, can be used to provide audible
indications for various beep codes.
See the table on the right for pin
definitions. Refer to the layout below
for the locations of the Internal Buzzer
(SP1).
Internal Buzzer (SP1)
Pin Definition
Pin# Definitions
Pin 1 Pos. (+) Beep In
Pin 2 Neg. (-) Alarm
Speaker
System Management Bus Header
A System Management Bus header for
IPMI 2.0 is located at JIPMI1. Connect
the appropriate cable here to use the
IPMI I
2
C connection on your system.
SMBus Header
Pin Definitions
Pin# Definition
1 Data
2 Ground
3 Clock
4 No Connection