Supero SuperServer 6028U Series Скачать руководство пользователя страница 85 | Manualshive

Страница: 85 / 122

background image

Chapter 7: AMI BIOS

7-1

Chapter 7

BIOS

7-1 Introduction

This chapter describes the AMI BIOS setup utility for the X10DRU-i+. It also provides
the instructions on how to navigate the AMI BIOS setup utility screens. The AMI
ROM BIOS is stored in a Flash EEPROM and can be easily updated.

Starting BIOS Setup Utility

To enter the AMI BIOS setup utility screens, press the <Del> key while the system
is booting up.

Note

: In most cases, the <Del> key is used to invoke the AMI BIOS setup screen.

There are a few cases when other keys are used, such as <F3>, <F4>, etc.
Each main BIOS menu option is described in this manual. The Main BIOS setup
menu screen has two main frames. The left frame displays all the options that can

be configured. Grayed-out options cannot be configured. Options in blue can be
configured by the user. The right frame displays the key legend. Above the key

legend is an area reserved for informational text. When an option is selected in
the left frame, it is highlighted in white. Often informational text will accompany it.

Note

: The AMI BIOS has default informational messages built in. The manufacturer

retains the option to include, omit, or change any of these informational messages.
The AMI BIOS setup utility uses a key-based navigation system called "hot keys."
Most of the AMI BIOS setup utility "hot keys" can be used at any time during setup
navigation. These keys include <F3>, <F4>, <Enter>, <ESC>, arrow keys, etc.

Note 1

: Options printed in

Bold

are default settings.

Note 2

: <F3> is used to load optimal default settings. <F4> is used to save the

settings and exit the setup utility.

How To Change the Configuration Data

The configuration data that determines the system parameters may be changed by

entering the AMI BIOS setup utility. This setup utility can be accessed by pressing
<Delete> at the appropriate time during system boot.

Note

: For AMI UEFI BIOS Recovery, please refer to the UEFI BIOS Recovery User

Guide posted @ http://www.supermicro.com/support/manuals/.

«
...
83
84
85
86
87
...
»

Содержание SuperServer 6028U Series



























































































































Отзывы:

Нет отзывов

Похожие инструкции для SuperServer 6028U Series

Бренд: Oki Страницы: 4

Бренд: Yeong Yang Страницы: 7

Бренд: Devolinx Страницы: 51

UniServer T1100 G3

Бренд: H3C Страницы: 138

SuperServer 1026T-M3

Бренд: Supero Страницы: 104

Бренд: Cable-Tronix Страницы: 33

Бренд: PRG Страницы: 50

S7000FC4UR - Server System - 0 MB RAM

Бренд: Intel Страницы: 13

Бренд: 2Wire Страницы: 2

Бренд: National Instruments Страницы: 4

SnapServer Expansion E2000

Бренд: Overland Storage Страницы: 5

Бренд: Overland Storage Страницы: 133

Бренд: BITMAIN Страницы: 15

Бренд: Kramer Страницы: 2

Бренд: Equitel Страницы: 40

DIRECTORY SERVER 2.0 - GATEWAY

Бренд: Red Hat Страницы: 66

Бренд: Compatible Systems Страницы: 75

PD02 PCoIP Zero Client

Бренд: EVGA Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды