Supero SuperServer 6028R-TR, Руководство пользователя

Страница: 60 / 126

5-14
S
UPER
S
ERVER 6028R-TR/TRT User's Manual
Reset Button
The Reset Button connection is
located on pins 3 and 4 of JF1 and
attaches to the reset switch on the
computer chassis. See the table on
the right for pin definitions.
Power Button
The Power On connection is on pins 1
and 2 of JF1. Momentarily contacting
both pins will power on/off the system.
This button can also be configured to
function as a suspend button (with a
setting in the BIOS). To turn off the
power when the system is in suspend
mode, press the button for 4 seconds
or longer. Refer to the table on the
right for pin definitions.
5-8 Connector Definitions
Required Connection
Required Connection
ATX Power 24-pin Connector
Pin Definitions
Pin# Definition Pin # Definition
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 COM 3 COM
16 PS_ON 4 +5V
17 COM 5 COM
18 COM 6 +5V
19 COM 7 COM
20 Res (NC) 8 PWR_OK
21 +5V 9 5VSB
22 +5V 10 +12V
23 +5V 11 +12V
24 COM 12 +3.3V
Reset Button
Pin Definitions (JF1)
Pin# Definition
3 Reset
4 Ground
Power Button
Pin Definitions (JF1)
Pin# Definition
1 Power Signal
2 Ground
Secondary Power Connector
JPWR1 and JPWR2 must also be
connected to the power supply. See
the table on the right for pin defini -
tions.
Power Connectors
A 24-pin main power supply connector
(J24) and two 8-pin power connectors
(JPWR1/JPWR2) are provided on the
serverboard. These power connectors
meet the SSI EPS 12V specification.
These power connectors must be con-
nected to your power supply. See the
table on the right for pin definitions.
+12V 8-pin Power
Pin Definitions
Pins Definition
1 - 4 Ground
5 - 8 +12V