Supero SUPERSERVER 6017TR-TF Скачать руководство пользователя страница 112

Страница: 112 / 140

7-14

SUPERSERVER 6017TR-TQF/TFF/TF User's Manual

Device Tagging

Select Enabled to support device tagging. The options are

Disabled

and

Enabled.

Thermal Throttling

Throttling improves reliability and reduces power consumption in the

processor via automatic voltage control during processor idle states. The

options are Disabled and

CLTT

(Closed Loop Thermal Throttling).

South Bridge Confi guration

This feature allows the user to confi gure the settings for the Intel PCH chip.

PCH Information

This feature displays the following PCH information.

Name:

This item displays the name of the PCH chip.

Stepping:

This item displays the status of the PCH stepping.

USB Devices:

This item displays the USB devices detected by the BIOS.

All USB Devices

This feature enables all USB ports/devices. The options are Disabled and

Enabled

EHCI Controller 1/EHCI Controller 2 (Available when All USB Devices is
set to Enabled)

Select Enabled to enable EHCI (Enhanced Host Controller Interface) Controller

1 or Controller 2. The options are Disabled and

Enabled

Legacy USB Support (Available when USB Functions is not Disabled)

Select Enabled to support legacy USB devices. Select Auto to disable legacy

support if USB devices are not present. Select Disabled to have USB devices

available for EFI (Extensive Firmware Interface) applications only. The settings

are Disabled,

Enabled

and Auto.

Port 60/64 Emulation

Select Enabled to enable I/O port 60h/64h emulation support for the legacy USB

keyboard so that it can be fully supported by the operating systems that does not

recognize a USB device. The options are Disabled and

Enabled

Содержание SUPERSERVER 6017TR-TF













































































































































Результаты поиска

Содержание SUPERSERVER 6017TR-TF

Отзывы:

Похожие инструкции для SUPERSERVER 6017TR-TF

Бренды по названию

Популярные бренды

Supero SUPERSERVER 6017TR-TF, Руководство пользователя

Результаты поиска

Содержание SUPERSERVER 6017TR-TF

Отзывы:

Похожие инструкции для SUPERSERVER 6017TR-TF

Бренды по названию

Популярные бренды