Supero SUPERSERVER 6017R-N3RF4+, Руководство пользователя

Страница: 70 / 124

5-24
S
UPER
S
ERVER 6017R-N3RF4+/6017R-N3RFT+ User's Manual
Watch Dog Enable/Disable
JWD1 controls the Watch Dog function.
Watch Dog is a system monitor that
can reboot the system when a software
application “hangs”. Pins 1-2 will cause
WD to reset the system if an applica-
tion hangs. Pins 2-3 will generate a
non-maskable interrupt signal for the
application that has hung. See the table
on the right for jumper settings. Watch
Dog must also be enabled in BIOS.
LAN Port
Jumper Settings
Jumper Setting De fi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
Watch Dog
Jumper Settings
Jumper Setting De fi nition
Pins 1-2 Reset
Pins 2-3 NMI
Open Disabled
SMB to PCI Express Slots
Jumpers JI
2
C1 and JI
2
C2 allow you to
connect the System Management Bus
(I
2
C) to the PCI Express slots. Both
jumpers must have the same setting to
function correctly. The default setting is
disabled. See the table on the right for
jumper settings.
SMB to PCI-Exp
Jumper Settings
Jumper Setting De fi nition
Closed Enabled
Open Disabled
JPL1/JPL2
Use JPL1 to enable/disable LAN ports
1/2, and use JPL2 for LAN ports
3/4. See the table on the right for
jumper settings. The default setting
is Enabled.
BMC Enable
Jumper JPB1 allows you to enable the
embedded the Nuvoton BMC (Base-
board Management) Controller to pro-
vide IPMI 2.O/KVM support on the
serverboard. See the table on the right
for jumper settings.
BMC Enable
Jumper Settings
Jumper Setting De fi nition
Pins 1-2 BMC Enable
Pins 2-3 Normal (Default)