Supero SUPERSERVER 6017R-N3RF4+, Руководство пользователя

Страница: 65 / 124

Chapter 5: Advanced Serverboard Setup
5-19
TPM Header/Port 80
A Trusted Platform Module/Port 80
header is located at JTPM1 to provide
TPM support and Port 80 connection.
Use this header to enhance system
performance and data security. See
the table on the right for pin de
fi ni-
tions.
TPM/Port 80 Header
Pin Defi nitions
Pin # De fi nition Pin # De fi nition
1 LCLK 2 GND
3 LFRAME# 4 <(KEY)>
5 LRESET# 6 +5V (X)
7 LAD 3 8 LAD 2
9 +3.3V 10 LAD1
11 LAD0 12 GND
13 SMB_CLK4 14 SMB_DAT4
15 +3V_DUAL 16 SERIRQ
17 GND 18 CLKRUN# (X)
19 LPCPD# 20 LDRQ# (X)
Standby Power Header
The Standby Power header is located
at JSTBY1. See the table on the right
for pin definitions. (You must also
have a cable to use this feature.)
Standby PWR
Pin Defi nitions
Pin# De fi nition
1 +5V Standby
2 Ground
3 Wake-up
Power SMB (I 2 C) Connector
Power System Management Bus (I
2
C)
(connector at JPI
2
C1) monitors power
supply, fan and system temperatures.
See the table on the right for pin
de
fi nitions.
PWR SMB
Pin Defi nitions
Pin# De fi nition
1 Clock
2 Data
3 PWR Fail
4 Ground
5 +3.3V
IPMB
A System Management Bus header
for IPMI 2.0 is located at JIPMB1.
Connect the appropriate cable here
to use the IPMB I
2 C connection on
your system.
IPMB Header
Pin Defi nitions
Pin# De fi nition
1 Data
2 Ground
3 Clock
4 No Connection