Supero SUPERSERVER 6012P-6, Руководство пользователя

Страница: 79 / 110

Chapter 7: BIOS
7-9
Mode
Specify the parallel port mode. Options are Output Only, Bi-directional,
EPP and ECP .
DMA Channel
Specify the DMA channel. Options are DMA1 and DMA3 .
Floppy Disk Controller
This setting allows you to assign control of the floppy disk controller.
The options are Enabled (user defined), Disabled and Auto (BIOS
controlled).
Base I/O Address
Select the base I/O address for the parallel port. The options are
Primary and Secondary.
Large Disk Access Mode
This setting determines how large hard drives are to be accessed. The
options are DOS or Other (for Unix, Novellle NetWare and other operating
systems).
Local Bus IDE Adapter
Use this setting to enable the integrated local bus IDE adapter. Options are
Disable, Primary, Secondary and Both .
! ! ! ! !
Advanced Chipset Control
Access the submenu to make changes to the following settings.
Enable Memory Gap
This setting allows you to turn off system RAM to free up address space.
The options for this setting are Disabled and Extended.