Supero SUPERSERVER 5017P-TF, Руководство пользователя

Страница: 36 / 95

5-8
S
UPER
S
ERVER 5017P-TLN4F/TF User's Manual
Reset Button
The Reset Button connection is
located on pins 3 and 4 of JF1 and
attaches to the reset switch on the
computer chassis. See p. 5-4 and the
table on the right for pin definitions.
Power Button
The Power On connection is on pins
1 and 2 of JF1. These should be con-
nected to the chassis power button.
See p. 5-4 and the table on the right
for pin definitions.
5-8 Connector Definitions
ATX Power 24-pin Connector
Pin Definitions
Pin# Definition Pin # Definition
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 COM 3 COM
16 PS_ON 4 +5V
17 COM 5 COM
18 COM 6 +5V
19 COM 7 COM
20 Res (NC) 8 PWR_OK
21 +5V 9 5VSB
22 +5V 10 +12V
23 +5V 11 +12V
24 COM 12 +3.3V
Reset Button
Pin Definitions (JF1)
Pin# Definition
3 Reset
4 Ground
Power Button
Pin Definitions (JF1)
Pin# Definition
1 Power Signal
2 Ground
Power Connectors
The 24-pin power connector is used
to provide power to the motherboard.
This connector meets the SSI EPS
12V specification. See the tables on
the right for pin definitions.
NC = No Connection
Overheat (OH)/Fan Fail LED
Connect an LED cable to pins 7 and
8 of JF1 to provide advanced warn-
ings of chassis overheat or fan failure.
Refer to the table on the right for pin
definitions.
OH/Fan Fail Indicator
Status
State Definition
Off Normal
On Overheat
Flash-
ing
Fan Fail